Hotsync For Macintosh; Hotsync For Windows - Fourier TriLog User Manual

1. Place your handheld computer in the cradle
2. Press the HotSync button on the cradle
2.HotSync for Macintosh ®
System requirements for the ImagiProbe conduit are those of Palm Desktop 4: Mac
OS X (version10.1.2 or higher) or Mac OS 9.x
See http://www.palm.com/software/desktop/mac.html.
Changing HotSync's Default Settings for the ImagiProbe Conduit
By default, the ImagiProbe conduit is set up to copy data from the ImagiProbe
application on the handheld computer into an ImagiWorks HotSync Data folder on
your Macintosh computer.
Where this folder is located depends on which OS you are running:
•
If you are running OS 9 and do not have Multiple Users turned on, the
ImagiWorks HotSync Data folder is in the <boot volume>:Documents folder.
•
If you are running OS 9 and have Multiple Users turned on,the ImagiWorks
HotSync Data folder is in the <boot volume>:Users:<logged in user's
name>:Documents folder.
•
If you are running OS X,the ImagiWorks HotSync Data folder is in the logged
in user's <home>:Documents folder.
Also the ImagiProbe conduit will, by default, report samples in elapsed time instead
of according to time of day.
You may wish to change these default settings.
To turn off HotSync for the ImagiProbe system, from the HotSync Manager:
1. Choose Conduit Settings from the HotSync menu
2. Double-click ImagiProbe to open the ImagiProbe Conduit Settings
window
3. .Choose Do nothing
4. If you wish to make this setting apply to multiple HotSyncs, then click
Make Default (otherwise the HotSync action setting change lasts
only for the next HotSync).
5. Click OK to save the change and close the ImagiProbe Conduit
Settings window.
Important: You will not be able to copy data from the handheld computer to the
desktop computer if you set the ImagiProbe Conduit to "Do nothing."
3.HotSync for Windows ®
System requirements for the ImagiProbe conduit are those of Palm Desktop 4: PC
running Windows XP or 95/98/2000/ME or NT 4.0.
See http://www.palm.com/software/desktop.
Changing HotSync's Default Settings for the ImagiProbe Conduit
By default, the ImagiProbe conduit is set up to copy data from the ImagiProbe
application on the handheld computer into an ImagiWorks HotSync Data folder in the
appropriate "My Documents" folder. The ImagiProbe conduit will also by default
42 Chapter 2 Working with Palm Handheld