View The Data; Display Options; Graph Display - Fourier TriLog User Manual

3.4. View the Data

3.4.1.

Display Options

The MultiLab program's screen consists of four parts: the graph window, table
window, video window and Data Map window. You can display all four parts
simultaneously (the default view) or any combination of the four.
The graph window is the main window by default and is and displayed in the center
of the application window. To specify other window as the main window:
1. Click View on the menu bar, then click View selection to open the
View selection dialog box:
2. Check the checkbox next to any window you'd like to include in the
view
3. Click the window display type you want
4. Click OK
In addition to these sections, you have the option to display an on-screen meter for
each of the sensors (see page 63).
3.4.2.

Graph Display

Click Graph to display or hide the graph. The default graph display is the data
set or sets plotted vs. time, but you can change the X-axis to represent any of the
individual data sets (see page 60).
The graph usually displays all the data sets of a given recording, but you can use the
Data Map to remove one or more of the sets from the graph (see page 64).
In order to keep the graph clear and simple, only two Y-axes are shown on the graph
at once. If there are three curves in the graph, one of the Y-axes is hidden. To make
this axis visible, select the corresponding plot with the cursor (see section 2 below).
You can identify the Y-axis by its color, which matches the plot color.
Figure 13: View selection dialog box
Chapter 3 Working with MultiLab 57