Working With Sensors And Calibrations; Accessing The Sensor Module; Viewing Sensors And Sensor Notes - Fourier TriLog User Manual

2.5. Working with Sensors and Calibrations

The ImagiProbe installer includes calibrations for commonly used sensors (e.g. Light,
Temperature, Voltage, and pH).You can view the list of installed sensors and
calibrations from the Sensor module. Use the Sensor module to create new sensors
and calibrations. You can also add sensors and calibrations by downloading them
from the ImagiWorks.Inc. Website and installing them using the HotSync process.
2.5.1.

Accessing the Sensor Module

To access the Sensor module, from the Investigations form:
1. Tap the Menu icon, or press the Menu key on your handheld
computer to display the ImagiProbe application menus
2. Choose the Go menu
3. Select Sensor List to display the Sensor list
2.5.2.

Viewing Sensors and Sensor Notes

To view an installed sensor, from the Sensor list:
1. Scroll through the list of sensors
2. Tap on a sensor name (e.g. Light) to view its manufacturer and a list
of calibrations for that sensor (e.g. 0 – 600 lux)
3. Tap the Notes icon to view notes for that sensor
4. Tap Done to return to the Sensor form
5. Tap Back in the View Sensor form to return to the Sensor list.
Chapter 2 Working with Palm Handheld 33