Program Trilog; Setup; Quick Setup - Fourier TriLog User Manual

3.5. Program TriLog

3.5.1.

Setup

1. Quick setup

Use the Setup wizard to guide you through the setup process.
1. Click Setup wizard
wizard:
The first step is to assign sensors to each input. If you are working
with TriLog in Auto ID mode, the sensors are selected automatically
as you plug them in to the TriLog. Otherwise, you can manually select
the sensors you are using from the corresponding input drop lists.
2. Click Next to move to the second step:
66 Chapter 3 Working with MultiLab
on the main toolbar to open the setup
Figure 16: Setup wizard step 1 of 3
Figure 17: Setup wizard step 2 of 3