Functionality And Operation; Short Description - Kettler SM3616-68 Training And Operating Instructions

Functionality and Operation

This device is independent of mains voltage. As of approximately 30 pedal revolutions, the
generator generates voltage in order to supply the electronics and charge an accumulator. If
the charge condition is sufficient, the accumulator provides for the voltage supply during
standstill. The accumulator plug prevents the discharge of the accumulator via the electronics.
Before commissioning the device, pull the accumulator plug out of the socket. If the
accumulator's charge is sufficient, the display lights up. If this is not the case or if the display
is only illuminated for a short time, you have to charge the accumulator by means of training.
In case of non-use, plug the accumulator plug in the socket again.
Without activity, the electronics will switch off the display after 90 seconds.
A wall power supply for charging the accumulator is available as accessory via our service.

Short description

The electronics consists of a function range with buttons and an
indicating range (display) with variable symbols and graphics.
SM3616-68 / SM3656-68
!
Indicating range
Display
Function range
Buttons
19
GB