Configuring Advanced Network Settings - Honeywell HRHT4041 User Manual

Figure 9-4
2. On the 3G/4G Setting page, you can configure the following settings:
•
Ethernet Card
•
Enable
•
Network Type
•
APN
•
AUTH
•
Dial Number
•
User Name
•
Password
•
Dial
Click Apply to save your settings.
3.
If you want to exit the Setting menu, click OK.
4.

Configuring Advanced Network Settings

This section describes how to configure PPPoE, DDNS, SYNC TIME, EMAIL, UPnP, SNMP,
MULTICAST and P2Psettings.
Select the wireless network adapter name.
Select or clear the check box to enable or disable 3G/4G
wireless connection using the selected wireless network
adapter.
Select the network type that meets your requirements.
Select the wireless connection server that you want to use
to access the wireless network.
Select the authentication mode that you want to use to
access the wireless network: PAP or CHAP.
Enter the 3G/4G network dial-up number that you received
from your Internet service provider.
Enter a user name for logging on to the 3G/4G network.
Enter a password for logging on to the 3G/4G network.
Click Dial to manually enable or disable the 3G/4G network
connection.
Configuring Network Settings
75