Table of Contents
Advertisement
Configuration
3.
4.
5.
6.
7.
Configuring for Text Input
The DVR can be set to react to text input from devices such as ATMs (Automated Teller
Machines) and POS (Point of Sale; i.e., cash registers). You can configure the DVR for
each text-in device.
1.
Document 800-03097 Rev C
03/09
Note
For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Highlight a field under the Alarm-Out heading, and press
Alarm Output and Beep (the internal buzzer) that you would like to activate and
to sound whenever the DVR detects video loss on the selected camera.
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight a field under the Notify heading, and press
menu appears.
Toggle the entire list On and Off by highlighting Notification and pressing
Toggle the individual items On and Off by highlighting that item and pressing
. Highlight OK and press
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Highlight a field under the PTZ heading, and press
appears. Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects video loss on the selected
camera's input.
Save your Motion Detection changes by highlighting Save and pressing
Select Cancel to exit the screen without saving the changes.
Highlight Text-In in the Event menu and press
appears.
to accept your changes.
. A list of PTZ presets
. The Text-In setup screen
. Select between
. The Alarm-In Notify
.
.
91
Advertisement
Table of Contents
