Setting The Alarm Threshold Value; Configuring The Snapshot Clip Export Settings; Configuring The Osd Settings; Configuring The Timeline Settings - Honeywell MAXPRO NVR XE Operator's Manual

L O G G I N G O N A N D F A M I L I A R I Z A T I O N
2
Setting preferences
To define the video display for each preview panel
1.
2.
3.
4.
S
E T TI N G T H E A L A R M T H R E S H OL D V A L U E
When configuring the event settings for a recorder and camera, you can specify a value
known as the Severity Level for each event. When the event occurs, the Severity Level value
is compared with the value in the Alarm Severity Threshold box in the preferences dialog
box. The alarm is triggered only when the Severity Level value is greater than the Alarm
Severity Threshold value.
For example, the alarm is triggered if the Severity Level for an event is 50 and the Alarm
Severity Threshold value is 40.
To set the Alarm Severity Threshold value
1.
2.
3.
4.
C
O NF IG U R IN G T H E S N A P S H O T C L IP E X P OR T S E T T I N G S
You can configure the time interval for the exported snapshot.
To configure the time interval for the exported snapshot
1.
2.
3.
4.
C
O NF IG U R IN G T H E
You can configure the OSD settings to change the properties such as type, color, and size of
the text that appears over the video displayed in a panel.
To set the font properties
1.
2.
3.
4.
5.
6.
C
O NF IG U R IN G T H E T I M E L I N E S E T T I N G S
To configure the timeline settings
1.
32
Click the Preferences option in the User menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
Select the video option for each panel corresponding to Preview Pane. When you select
Pre Alarm and Post Alarm, a dialog box appears. Select the time in seconds for which
you want to view video related to pre alarm and post alarm in the dialog box and click OK.
Click Apply.
Click OK to close the dialog box.
Click the Preferences option in the User menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
Under Server level settings, type the Alarm Severity Threshold.
Click Apply.
Click OK to close the dialog box.
Click the Preferences option in the User menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
Under SnapShot Clip Export Settings, select the Clip Export time in seconds.
Click Apply.
Click OK to close the dialog box.
OSD
Click the Preferences option in the User menu. The Preferences dialog box displays.
Click the OSD Settings tab.
Click Edit and select the font and color properties in the dialog box.
Click OK to close the font properties dialog box.
Click Apply in the Preferences dialog box.
Click OK to close the Preferences dialog box.
Click the Preferences option in the User menu. The Preferences dialog box displays.
S E T T I N G S
MAXPRO NVR Operator's Guide