Configuring Hdd Event Settings - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

Configuring HDD Event Settings

To configure HDD event settings
Go to Main Menu  Setting  Event  Abnormality  HDD.
1.
Figure 10-12
2. On the HDD tab, in the Event Type box, select the event type that you want to configure
settings for: No HDD, HDD Error, HDD No Space.
3. Select the Enable check box to enable HDD error detection.
4. Select the actions that you want the system to initiate when the selected event occurs:
•
Show Message
•
Alarm Upload
•
Send Email
•
Buzzer
•
Log
•
Voice Prompts
•
File Name
Click Apply to save your settings.
5.
98
Select the check box to enable a pop-up message
on your local host PC.
Select the check box to enable the system to
upload an alarm signal to the network (including to
an alarm center and/or web client).
Select the check box to enable the system to send
an email notification.
Select the check box to activate a buzzer noise at
the DVR.
Click to enable the DVR to record a local alarm log.
Select to enable audio broadcast/voice prompts in
response to a motion detection event.
Select a file for the voice prompt.