Configuring Ptz Functions - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

Configuring PTZ Functions

You can configure presets, tours, patterns, and borders using the PTZ control panel.
Configuring PTZ Preset
You can program preset positions for the PTZ camera. For example, you can point the camera
at a specific location, such as a doorway, when an alarm event occurs.
To program a preset
1. On the expanded PTZ control panel, click the Preset button.
Figure 3-11
2. Use the direction arrows to point the camera where you want to set as the preset, and
then click Set.
Figure 3-12
3. In the Preset box, enter a number for the preset, and then click Set to save your settings.
To program additional presets, repeat steps 1 through 3.
•
To delete a preset, enter the number of the preset that you want to delete in the Preset
•
box, and then click Del Preset.
Note
Configuring PTZ Tours
You can set up the PTZ camera to go from preset to preset in a specific order.
To program a tour
1. On the expanded PTZ control panel, click the Tour button.
34
Some protocols do not support the Del Preset function.