Configuring Zero-Channel Settings - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

Configuring Zero-Channel Settings

The zero channel function lets you view several video sources on one channel in a web browser,
saving bandwidth and improving upload speeds.
To configure zero channel encoding
1. Go to Main Menu  Setting  System  Display  Zero-Channel.
Figure 12-7
2. On the Zero-Ch Encode tab, configure the following settings:
•
Enable
•
Compression
•
Resolution
•
Frame Rate (FPS)
•
Bit Rate (Kb/S)
3. Click Apply to save your settings.
4. Open a web browser, enter the DVR's remote access IP address in the browser's address
field, and then log in.
5. Select Multi-Preview in the remote web client interface to display all of the DVR's video
sources in one channel.
122
Select the check box to enable the zero-channel
function or clear the check box to disable it.
Select the desired video compression standard
from the list. The default setting is H.264.
Select the desired video resolution from the list. The
default setting is D1.
Select a value between 1 and 30 (NTSC) or
between 1 and 25 (PAL).
Select a value between 896 and 4096. The default
setting is 1024.