Configuring Ftp; Configuring Record Settings - Honeywell HRHT4041 User Manual

Configuring FTP

To configure FTP settings
1. Go to Main Menu  Setting  Storage  FTP.
Figure 11-5
2. On the FTP page, click the Enable check box to enable uploading images to an FTP
server.
3. Configure the following settings:
Host IP: Enter the address of the FTP server.
Port: Enter the port of the FTP server.
Username: Enter the user name for logging on to the FTP server.
Password: Enter the password for logging on to the FTP server.
Anonymous: Select the check box to hide user name when logged on to the FTP server.
Remote Directory: Enter a name for the remote directory. If this is left blank, the NVR will
automatically create folder names.
File Length: This is the maximum size for image files being uploaded to the FTP server.
Enter a value between 0 and 65535 MB.
Image Upload Interval: This is the interval for uploading images to the FTP server. Enter
a time between 1 and 600 seconds.
Channel: Select a channel to upload images from, or select All to select all channels.
Weekday: Select a day of the week to upload images on, or select All to upload images
every day.
Time Periods: You can configure up to two time periods for uploading images. For each
period, select either Alarm&Analytics, Motion, or Regular images.
Configuring Storage Settings
111