Configuring Atm/Pos (Card Overlay) Settings; Configuring Com Settings; Configuring Net Settings - Honeywell HRHT4041 User Manual

Configuring ATM/POS (Card Overlay) Settings

The ATM/POS (card overlay) settings allow the DVR to communicate with automated teller
machines (ATMs) and point of sale (POS) machines in a retail environment.

Configuring COM Settings

To configure the COM settings
1. Go to Main Menu  Setting  System  ATM/POS  Com.
Figure 12-10
2. On the Com tab, configure the following settings:
•
Protocol
•
Overlay Channel
•
Overlay Mode
•
Overlay Position
Click Apply, and then click Save to save the settings.
3.

Configuring Net Settings

You can configure the network settings with or without the ATM/POS protocol.
To configure the network settings with the ATM/POS protocol
Select None or POS.
Select a camera.
The Preview and Record overlay modes are enabled
by default. Clear the check boxes if you want to
disable them.
Select Top Left, Bottom Left, Top Right, or Bottom
Right.
Configuring System Settings
125