Remote Control Operation - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

Remote Control Operation

It is strongly recommended to use a mouse to operate the DVR. However, you can also use the
supplied IR remote control. The following table describes basic remote control operations:
Figure 1-6
8
Table 1-6
Button
1 Power
2 Add (Address)
3 Forward
4 Slow Play
5 Next Record
6 Previous Record
7
Play/Pause
8 Reverse/Pause
9 Esc
10 Rec
11 Direction Keys
12 Enter
13 Mult
14 Fn
Alphanumeric
15
Keys
Action
Turn DVR on/off.
Enter number of device that you want to control.
Increase forward playback speed.
Decrease forward playback speed.
Select next video for playback.
Select previous video for playback.
Pause/resume forward playback.
In live view mode, enter video search mode.
Pause/resume reverse playback.
Return to previous menu or cancel current operation.
Manually start/stop recording.
While in recording interface, use direction buttons to
select recording channel. Press and hold record button
to enter manual recording interface.
Use left/right keys to switch currently activated control.
While in playback mode, use up/down buttons to
change playback channel.
Go to default. Go to menu.
Switch between multi-channel view and single-channel
view.
In single-monitor mode, using popup assistant function,
control PTZ cameras or adjust video color.
In PTZ control mode, switch the PTZ control menu.
In text mode, press and hold button to delete last character.
Enter passwords or switch channels. Press Shift to
switch input method.