Configuring The Video Recording Schedule - Honeywell HRHT4041 User Manual

Pack Mode: Set time length or file length. Specify a time between 1 and 60 minutes. The
default setting is 60 min; specify file length between 0 and 1025M.
Auto Delete Old Files: Select Never or Customized. If Customized is selected, in the Days
Ago box, enter the amount of time to elapse before the files are automatically deleted.

Configuring the Video Recording Schedule

Configuring the video recording schedule

1. Go to Main Menu  Setting  Storage  Schedule  Record.
Figure 11-2
2. On the Record tab, in the Channel box, select the channel (camera) that you want to
configure a recording schedule for.
In the Pre-Record box, enter a time between 0 and 30 seconds. The default setting is 4
3.
seconds. The pre-record time sets how long the DVR records before the scheduled
recording start time. For example, if the DVR is scheduled to start recording at 12:00 and
the pre-record time is set to 4 seconds, the DVR will start recording at 11:59:56.
4. If the DVR has two HDDs, select the Redundancy check box to enable redundant
recording on the second HDD. This HDD must first be configured as redundant on the
HDD Manage page (see
5. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
•
Regular
Configuring HDD Settings
The regular recording schedule is indicated by a
Configuring Storage Settings
on page 110).
107