Configuring Ftp Settings - Honeywell HRHM1041 User Manual

76 | Performance Series HQA Digital Video Recorder User Guide

Configuring FTP Settings

You can configure an FTP connection to upload image files at regular intervals to an FTP server.
To configure FTP settings
1.
2.
3.
4.
www.honeywell.com/security
Go to Main Menu > Setting > Network > FTP.
On the FTP page, click the Enable check box to enable uploading images to an FTP server.
Configure the following settings:
• Server IP Enter the address of the FTP server.
• Port Enter the port of the FTP server.
• User Name Enter the user name for logging on to the FTP server.
• Password Enter the password for logging on to the FTP server.
• Anonymous Select check box to hide user name when logged on to the FTP server.
• Remote Directory Enter a name for the remote directory. If this is left blank, the DVR will
create folder names automatically.
• File Length This is the maximum size for image files being uploaded to the FTP
server. Enter a value between 0 and 65535 MB.
• Snapshot This is the interval for uploading images to the FTP server. Enter a time
between 0 and 3600 seconds.
• Channel Select a channel to upload images from, or select All to select all
channels.
• Weekday Select a day of the week to upload images on, or select All to upload
images every day.
• Time Periods You can configure up to two time periods for uploading images. For
each period, select either Alarm, Motion, or Regular images.
Click Apply to save your settings. To test the FTP connection, click Test.