Airplane Basic Function; Model Select - RadioLink AT9S PRO Manual

Set up dual/triple rates
and exponential
(D/P,EXP) (Note that in
the middle of the left
side of the screen is
the name of the
channel and the switch
position you are
adjusting. D/R may be
set per channel by
choosing the desired
switch and mix rate.

2.3 AIRPLANE BASIC FUNCTION

2.3.1 Model Select

Model submenu: includes three function that manage model
memory: MODEL SELECT,MODELCOPY and MODEL NAME.
Since these functions are related, and all basic features are used
with most models, they are together in the Model submenu.
MODEL SELECT
Totally there are 15 models stored in the system, followed by model name and plane type to use on tap,
thus you don't need to set every time for different plane. MODEL NAME, MODEL TYPE and transmitter
voltage. Make sure that MODEL TYPE is accomplished with your plane type before flight. Or it will cause error
in servo and rudder.
COPY
Save the present data as another model type, it will be displayed by shadow area to differ from. When this
copy start, the object data will be fully covered including name, type and module type, and cannot recover.
Caution: when you save the present model type as another, all related data will be copied including the
Activate, assign SWITCH and adjust.
Close the function
From BASIC menu, choose the
D/R,EXP
Choose the desired control, and set the
first (EX: high) rate throws and
exponential.
Set the second(low)rate throws and
exponential.
to MIX，press
to SW，press
to POSI, press
to RATE ， press
position，
throttle barrel closed
to D/R,EXP，press
SwA to up position A
to CH, press
press
to D/R
Stick down，press
set ,press
Stick up，press
set ,press
Stick up，press
Stick up，press，
SwA to down position
to D/R
Repeat steps above to set low rate.
14
Radiolink Electronic Ltd
www.radiolink.com
to INH
，
to SwC
，
to DOWN
，
， to down
throttle stick down until the
to choose CH2，
，
to
，
, to
to EXP
to set，press
to set，press