Transmitter Displays& Buttons - RadioLink AT9S PRO Manual

Radiolink Electronic Ltd
www.radiolink.com
(2) SBUS&PWM dual signal output working mode: blue/purple LED indicates SBUS&PWM signal output at
the same time with 10 channels totally. CH9 outputs SBUS signal while the original CH1 outputs CH3 PWM
signal and original CH2 to CH6 output CH6 to CH10 PWM signal at the same time.
1.3.5 Transmitter Displays & Buttons
When you first turn on your transmitter, a confirmation double
beep sounds, and the screen shown below appears. Before
flying, or even starting the engine, be sure that the model type
and name appearing on the display matches the model that
you are about to fly! If you are in the wrong model memory,
servos may be reversed, and travels and trims will be wrong,
leading to an immediate crash.
Total timer: Shows the cumulated ON times. (Hours:
minutes)
T1/T2：T1/T2 timer display.(minutes: seconds)
MT：Model timer display Shows the cumulated ON time for each model.(hours: minutes)
Button instruction
MODE BUTTON
Press and hold MODE BUTTON for one second to open programming menus. Press MODE BUTTON to
switch between BASIC and ADVANCE. Press MODE BUTTON to scroll between conditions in certain
functions.
10