Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for RadioLink RC4GS V3
Summary of Contents for RadioLink RC4GS V3
- Page 1 RC4GS Digital 5 Channels Proportional RC System Instruction Manual Adaptable to RC Cars/Boats/Robot CE FCC RoHS * Please be kindly noted that this manual will be updated regularly and please visit RadioLink official website www.radiolink.com to download the latest version.
- Page 2 RadioLink Electronic Limited www.radiolink.com Thank you for choosing RadioLink 2.4 GHz 5CH radio -- RC4GS V3. To fully enjoy the benefits of this product and ensure safety, please read the manual carefully and set up the device as instructed steps.
- Page 3 (2) Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Packing list Items RC4GS V3 Transmitter R6FG Receiver User Manual Packing Box...
-
Page 4: Table Of Contents
RadioLink Electronic Limited www.radiolink.com Contents I. RC4GS V3 Remote Control System ........................5 1.1 Transmitter ..............................5 1.2 Receiver R6FG(Standard Pack) ....................... 6 1.2.1 R6FG Specification ..........................6 1.2.2 Receiver Installation and Binding ......................7 1.2.3 Working Mode ............................7 1.2.4 Gyro Setup .............................8 1.2.5 Signal/RSSI Real-time Return ....................... - Page 5 3.5 Dual Rate Function on RC4GS V3 ......................39 3.6 EPA Function on RC4GS V3 ........................39 3.7 Set Different ALARM for 30 Different Models on RC4GS V3 ..............39 3.8 ID Seed Function on RC4GS V3 ......................39 3.9 Cruise Control Function on RC4GS V3 ....................39 3.10 Head Track Function on RC4GS V3 .....................39...
-
Page 6: Rc4Gs V3 Remote Control System
RadioLink Electronic Limited www.radiolink.com I. RC4GS V3 Remote Control System RC4GS V3, 12ms only from transmitter to the receiver, thus provide control synchronous and perfect performance. The same FHSS spread spectrum and 16 channels pseudo random frequency sequence hopping of AT9S makes RC4GS V3 have superior anti-interference ability both at the same frequency band and different frequency bands. -
Page 7: Receiver R6Fg(Standard Pack)
Compatible Receiver: R6FG(Standard), R8FG, R7FG, R6F, R8EF, R8F, R4FGM, R4F Battery Tray Dimension: 89*59*25mm (3.5*2.32*0.98") 1.2 Receiver R6FG(Standard Pack) Receiver packed with RC4GS V3 is R6FG, 2.4GHz 6 channels, gyro integrated and high voltage servo supported. 1.2.1 R6FG Specification Size: 35*20*13mm (1.38*0.79*0.51") ... -
Page 8: Receiver Installation And Binding
Note 1. The binding between your R6FG and RC4GS V3 is already complete by default. Just need to make sure there is the solid light of R6FG and the signal tower in the transmitter. 2. NO gyro by default as factory setting. Since integrated gyro in R6FG will self-check, it is very important to remain R6FG still when powering it on. -
Page 9: Gyro Setup
ENTER to (dis)activate the warning and set the RSSI warning value. Note: The 'RATE: RPM' and 'T: NULL' telemetry functions are still under development. If there are new developments, we will announce them to the RadioLink official website as soon as possible. -
Page 10: Telemetry Of Model Battery And Receiver Voltage
RadioLink Electronic Limited www.radiolink.com 1.2.6 Telemetry of Model Battery and Receiver Voltage When done binding with R8FG, R7FG or R8F receiver, besides the telemetry of RSSI, receiver voltage, model battery voltage (maximum up to 8S lithium battery, 33.6V) can also be returned in real time. Users can personalize the warning value of low model battery voltage depending on the actual needs. -
Page 11: Rc4Gs V3 Functions
When binding is done, there’s signal tower on top middle of the screen. As there’s no amplifier module added on R6FG, the signal telemetry from receiver is about 80m(262.5ft). If the distance is longer than 80m, the signal tower may disappear but the control range of RC4GS V3 is as long as 400m(1312ft). -
Page 12: Language "Language
Eg. V6.6.7 in above picture. 2.3 Model Select "MODEL" RC4GS V3 can store model memories for 30 models. Use this function to call a new model. Each model can independently set the parameters of each function. -
Page 13: End Point Adjust "Epa
RadioLink Electronic Limited www.radiolink.com simultaneously and holding them down for one second), press “Enter” key once, the Model select function will be chosen. (2) Press “Enter” button, the current active model will be blinking. (3) To activate a different model by pressing “Dec(-)” or “Inc(+)” button until the desired model blinks. -
Page 14: Steering Exponential "Stexp
RadioLink Electronic Limited www.radiolink.com “Dec(-)” or “Inc(+)” button to adjust the rate value. After setting, press "Enter" key, the rate value stops flashing, and the channel rate value is set. (4) Press "Exit" to return to the home page. 2.5 Steering Exponential "STEXP"... -
Page 15: Throttle Exponential "Thexp
RadioLink Electronic Limited www.radiolink.com for one second), press “Inc(+)” button four times to chose STSPD function. (2) Press“Enter” button to get into STSPD function interface, press “Dec(-)” or“Inc(+)” button to select setup item, then press “Enter” key and the initial value of selected setup item will blink. -
Page 16: Throttle Speed "Thspd
RadioLink Electronic Limited www.radiolink.com Adjustment method for EXP curve Setup items MODE: EXP turn on or turn off RATE: EXP rate Adjustment range MODEL: OFF/ON RATE: -100 ~ 0 ~ +100 1. Enter the function menu and use “Dec(-)” or “Inc(+)” button to access THEXP function, then select the “FWD-EXP”... - Page 17 RadioLink Electronic Limited www.radiolink.com OFF: Speed1 or speed2 can be selected. OFF means shut down the throttle speed function Adjustment method for SPEED1 Setup items MODE: Speed type selection ALL: Speed adjustment Adjustment range 0~100 (each direction) At 100, there is no delay (1) Enter the function menu and use “Dec(-)”or“Inc(+) ”...
-
Page 18: Function "A.b.s
RadioLink Electronic Limited www.radiolink.com setup item will blink. Use “Dec(-)” or “Inc(+)” button to adjust the value. (Note: In the interface of adjusting the value, return to the initial value (the initial value of LOW and HIGH is “100”, the initial value of TGP1 is “30”) by pressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.) Press “Enter”... - Page 19 RadioLink Electronic Limited www.radiolink.com (Note: In the interface of adjusting the value, return to the initial value "50" by pressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.) Press “Enter” button, the adjusted value stops blinking, now the value has been set.
-
Page 20: Throttle Acceleration "Accel
RadioLink Electronic Limited www.radiolink.com (5) Cycle duty ratio setup Select setting item "DTY" by pressing “Dec(-)” or “Inc(+)” button, then press“Enter” key and the initial value of “DTY” will blink. Use “Dec(-)” or “Inc(+)”button to adjust the duty ratio. (Note: In the interface of adjusting the value, return to the initial value "0" by pressing “Dec(-)” and “Inc(+)”... -
Page 21: Idle-Up "Idlup
RadioLink Electronic Limited www.radiolink.com Setup item FWRD: Forward side acceleration amount BRAK: Brake side acceleration amount Throttle acceleration adjustment Enter the function menu and use “Dec(-)” or “Inc(+)” button to access ACCEL function, then press “Enter” button to get into ACCEL function interface. -
Page 22: Throttle Lock "Th-Lock
RadioLink Electronic Limited www.radiolink.com (1) Enter the function menu and use “Dec(-)” or“Inc(+) ” button to access IDLUP function. (2) Press “Enter” button to get into IDLUP function interface. (3) Press “Enter” key, and the initial value of RATE will blink. Use“ Dec(-) ” or “Inc(+)” button to adjust the value. -
Page 23: Channel Reverse "Reverse
RadioLink Electronic Limited www.radiolink.com CH5: -100~0~+100 Initial value : 0 (1) Enter the function menu and use “Dec(-)”or “Inc(+)” button to access SUBTRIM function. (2) Press “Enter” button to get into SUBTRIM function interface. (3) Use “Dec(-)” or “Inc(+)” button to select ST channel, press “Enter”key, and the initial value of ST will blink. -
Page 24: Brake Side Adjustment "Atl
RadioLink Electronic Limited www.radiolink.com Dual Rate Setting: (1) Long press "Exit" and "Enter" button simultaneously for one second to enter the function menu of RC4GS V3. Press "Inc(+)" button at the bottom of the screen to move the cursor to "13. D/R", and then press " Enter”... -
Page 25: Programmable Mixes "Pmix01/02
RadioLink Electronic Limited www.radiolink.com 2.16 Programmable Mixes "PMIX01/02" Programmable mixes between arbitrary channels These functions allow you to apply mixing between the steering, throttle, CH3, CH4 and CH5. PMIX01 setting is the same with PMIX02 Programmable Mixes "PMIX" MXMD:Mix mode Enter the function menu and use“Dec(-)”or “Inc(+)”... -
Page 26: Mix Control Setup
RadioLink Electronic Limited www.radiolink.com channel. ST: "LEFT"; TH: "FWRD"; CH3:"UP") by pressing “Dec(-)” or “Inc(+)” button. Press “Enter” key, the initial value of "LEFT", "FWRD", or "UP" will blink, Use “Dec(-)” or “Inc(+)” button to adjust the left, forward, or up side mixing amount. - Page 27 1. Throttle Reverse：NOR-REV Hold RC4GS V3 as the below pic. Normally, pull the throttle, the right track should be moving forward while push the throttle and the right track should be backward. Pull the throttle，right track moves forward，left track remains still If pulling the throttle and the left track moves backward;...
- Page 28 * If the throttle reverse is correct, skip this throttle reverse setup. 2. Steering Reverse：NOR/REV Hold RC4GS V3 as the below pic. Normally, if turn the wheel right/clockwise, the left track should be moving forward while turn the wheel left/anticlockwise and the left track should be backward.
- Page 29 RadioLink Electronic Limited www.radiolink.com Mix Control Setup 1. Throttle mix steering：Tracked vehicles moving forward/backward As tracked vehicles moving forward/backward is controlled by throttle, throttle leads steering in the mix control. That is, Master-Throttle, Slave-Steering. Please refer to the “button operation”and get into below interface to complete the setup.
-
Page 30: Auxiliary Channel "Aux-Ch
2.17 Auxiliary Channel "AUX-CH" In addition to the two basic channels of the steering channel (channel 1) and the throttle channel (channel 2), RC4GS V3 also has three auxiliary channels, all of which can be customized to assign control switches. -
Page 31: Model Name "Name
Factory default name: MODEL1 (1) Long press "Exit" and "Enter" button simultaneously for one second to enter the function menu of RC4GS V3. Press "Inc(+)" button at the bottom of the screen to move the cursor to "18. NAME". (2) Press “Enter” button to get into NAME function interface, the first character of current name will blink, and the blinking character can be reset. -
Page 32: Gyro Sensitivity "Gyro
RadioLink Electronic Limited www.radiolink.com Transmitter voltage is low Receiver voltage is low RC model battery voltage is low The RSSI alarm value is turned off by default. Users can set it as the RSSI value corresponding to the farthest safe distance of the actual control. For example, the farthest remote control distance is 400m, the corresponding RSSI value is -85dBm, then you can set the RSSI alarm value as -85dBm. -
Page 33: Subsidiary Id "Id Seed
ID codes of this transmitter. For example, RC4GS V3 has completed the binding with 10 different boats and the setup of respective parameters. Turn on the ID SEED function, select ID.1 boat and drive it to the central of water but it stops working unexpectedly. -
Page 34: Dsc Port Setting "Dsc
Head track mode: If you need to connect FPV goggles with head track function to the DSC port of RC4GS V3, please set the mode to: head track. Then directly insert one end of the standard audio head of the FPV goggles into the DSC port of the remote control, and the other end into the Track Out port of the FPV goggles. -
Page 35: Timer Setting "Timer
When the DSC mode is selected as head track, the DSC port of RC4GS V3 outputs in channel 5 and channel 6 by default. Then connect the roll servo and pitch servo used to control the pan-tilt to the pins of R6FG receiver in channel 5 and channel 6, and then swing the FPV goggles up and down or left and right, and the servos of the corresponding channel will swing accordingly. -
Page 36: Factory Reset "Reset
RadioLink Electronic Limited www.radiolink.com Note: 1. When triggering the timing function, please do not put the switch in the stop or reset position, otherwise the timing function cannot be activated. 2. When the switch is not enough, there are 2 ways to reset all timings: a. By setting the "alarm" value, all timings can be reset. - Page 37 1. Check the firmware version in the basic menu--LANGUAGE before firmware update. 2. Download the newest firmware in RadioLink official website. (www.radiolink.com/rc4gsv3_firmware) 3. Power off RC4GS V3. And then connect it to the computer with a USB cable. 4. Power on RC4GS V3.
- Page 38 RadioLink Electronic Limited www.radiolink.com 3.2 Throttle and Steering Calibration The function is used to correct the steering wheel, throttle trigger and VR knob of the transmitter. When there is mechanically offset of the travel amount, the function can also be used.
- Page 39 RadioLink Electronic Limited www.radiolink.com 4. Turn the wheel and VR knob fully clockwise and then fully counterclockwise. The value of the calibration interface will change at the same time. 5. After that, press Enter button in the transmitter to confirm. The following OK will appear on the screen, indicating that the calibration is complete.
- Page 40 3.5 Dual Rate Function on RC4GS V3 Video tutorial：https://www.youtube.com/watch?v=CjvbySByvvw 3.6 EPA Function on RC4GS V3 Video tutorial：https://youtu.be/IunGUACFDlo 3.7 Set Different ALARM for 30 Different Models on RC4GS V3 Video tutorial：https://www.youtube.com/watch?v=NaFS6yijjVw 3.8 ID Seed Function on RC4GS V3 Video tutorial：https://www.youtube.com/watch?v=dp6DriYgUhw 3.9 Cruise Control Function on RC4GS V3 Video tutorial：https://www.youtube.com/watch?v=mbBltmpR9KI...