Database Of Universal Variables; Communication Protocol; General Information - RADWAG WPY series User Manual

27.7.8. Database of universal variables

The database include patterns of general purpose variables which users can
attribute to screen function buttons
any alphanumeric text intended to be printed.
Notice:
The procedure of attributing functions to buttons is described in ch. 17.2
of this manual.
Procedure of editing databases:
• Enter <
• Enter <
Universal variable record:
Code
Value to pay

28. COMMUNICATION PROTOCOL

28.1. General information

A. A character protocol scale-terminal has been designed for
communication between RADWAG scales and external devices
via RS-232 interface.
B. It consists of commands sent from an external device to the scale
and a responses from a scale.
C. Responses are sent every time after receiving a command
(reaction for any command).
D. Using commands allows users to receive some information about
the state of scale and/or influence the operation e.g.: Requesting
weighing results, display control.
Databases> according to ch. 26 of this manual,
Universal variables> and press the required position.
Universal variable code
Universal variable value intended to be printed
, , , ,
92
in order to enter