Zeroing; Tarring - RADWAG WPY series User Manual

• Avoid side loads, particularly side strokes:

13.2. Zeroing

In order to zero the indication choose a platform on the touch panel and
press . After zeroing is performed the indication is equal zero and
following symbols usually appear: and .
Zeroing is possible only when the indication is stable.
Notice:
Zeroing is possible only within ±2% of full range around zero. If the
zeroed value is beyond the interval of ±2%, Err2 is displayed.

13.3. Tarring

In order to tare the scale choose a platform on the touch panel if necessary,
put a package on the pan and press . You will see the indication
equal zero and following symbols usually appear:: Net and .
After placing a load on the weight pan net mass will be shown. Tarring is
possible within the whole range of the scale. After unloading the pan the
display shows the tarred value with minus sign.
You can also inscribe tare values to the assortment database. Every product
has a field "Tare". In that case tare is automatically set to this value after
selecting the product.
Notice:
Tarring cannot be performer when a negative or zero value is being
displayed. In such case Err3 appears on the display.
30