Start Mass Adjustment - RADWAG WPY series User Manual

21.2. Start mass adjustment

It is possible to adjust only a start mass, it helps to correct the start zero
when the span does not change.
Procedure:
• Enter submenu <
and select: "
• After entering the parameter the following message box appears:
• Take the load off the pan of platform 1,
• Press button
start mass: „Evaluation of starting mass",
• After the procedure has been completed the following message
box appears:
• Return to weighing, saving parameters.
Customer Calibration> according to ch. 21
Platform 1 /
. The following message appears during adjusting
Setting of start mass",
61