RADWAG WPY series User Manual page 109

3)
{115} CPG Report: Limit of the average
3)
{116} CPG Report: Standard deviation
3)
{117} CPG Report: Measurements
3)
{118} CPG Report: Unit
3)
{119} CPG Report: Report Number
3)
{120} Average Tare Report: Date
3)
{121} Average Tare Report: Result
3)
{122} Average Tare Report: Standard deviation
3)
{123} Average Tare Report: 0.25T1
3)
{124}
Average Tare Report: Number of Measurements
3)
{125}
Average Tare Report: Measurements
3)
{126}
Average Tare Report: Report Number
{130} Source Warehouse: Name
{131} Source Warehouse: Code
{132} Source Warehouse: Description
{135} Target Warehouse: Name
{136} Target Warehouse: Code
{137} Target Warehouse: Description
{140} Net mass in calibration unit: Total
{141} Additional display: WD
{142} Additional display: WWG
{143} Hex
{144} Hex UTF8
{145} Partial mass
{146} Gross mass in current unit
{147} Tare in current unit
Notice:
1) Variables {0} and {1} is terminated by CR LF, i.e. the cursor
is moved to the beginning of the next line by default,
2) In case of variable {39}, each position from the database (1,2-n)
is formated as follows: Position 1 - {39:1}, Position 2 - {39:2}, etc.
3) Variables not related to „Comparator software",
4) In case of variable {64}, each line (L1-Ln) is formatted according
to the pattern: Line 1 - {64:L1}, Line 2 - {64:L2}, etc.
109