• Write a new offset and confirm it by pressing
16.3.3. Code length
Number of characters that is considered while searching the assortment
database.
Procedure:
• Enter <
• Choose „
keyboard is displayed,
• Write a new length and confirm it by pressing
16.4. Transponder card reader
Selecting operator (logging in) can be done in two ways:
• Typing a password on a keyboard,
• Approaching a transponder card to the reader.
The card needs to be registerd first.
Notice:
In case of problems with reading transponder cards check the submenu
<
Communication> and set appropriate baud rate (default 9600b/s).
16.4.1. Com port for transponder card readers
Procedure:
• Enter group of parameters <
of this manula, select „
and set appropriate option.
Devices> according to ch.16 of the manual,
Barcode Scanner /
Transponder cards reader /
Code Length" then the screen
Devices> according to ch. 16
43
.
.
Port"