20.3. Sound signal
Procedure:
• Enter <
and set accordingly.
Settings:
None
Buttons
Sensors
All
20.4. Touch panel calibration
Touch panel calibration is required when inappropriate operation is
recognized. E.g. the reaction in a different place than the touching point.
Procedure:
• Enter submenu <
• Select <
appears,
• Using a thin and soft pointer press (keep pressed for some time)
in the point where the cross appears, after indicating the 4
confirm changes by pressing
21. CUSTOMER CALIBRATION
Scales require to recalculate internal divisions to more suitable ones (e.g.
g, kg etc.). In order to do this they require a calibration factor. It is adjusted
during the calibration procedure using a mass standard. Calibration should
be made when weighing a standard mass shows a different mass value.
Others> according to ch. 20 of this manual, <
- Sound for buttons and proximity sensors disabled
- Sound for buttons enabled
- Sound for proximity sensors enabled
- Sound for buttons and proximity sensors enabled
Others> according to ch. 20 of this manual,
Touch Screen Calibration> and then an editing field
.
An option only for non-verified scale
58
Beep>
th
place