Minimum Reference Mass - RADWAG WPY series User Manual

Options:
-
No
-
Yes
Function < Automatic correction of reference mass> in mode
Counting Pieces> is enabled at the moment of estimating the sample
<
quantity and signalled by displaying <PCS> and <SMP> (single piece mass)
on the top part of the display.
There are four criteris of working "Automatic correction of reference
mass" function:
1. equilibrium should be reached,
2. quantity of pieces should be increased,
3. added quantity of pieces should not be greater than double
number of pieces on the pan,
4. the new sample can be different from the old sample by ± 0.3
of pcs (absolute value),
If a user recognises that the sample quantity is adequate the unit mass
(single piece mass) can be saved (see ch. 24.5 of this manual)
and disable the function by pressing
Notice:
While the function is active
Pressing

22.8. Minimum reference mass

Users before beginning the procedure of single piese mass evaluation can
declare "minimum reference mass" i.e. minimum total weight of all pieces
put on the scale pan expressed in reading divisions.
Procedure:
• Enter parameter group <
22 of this manual,
Automatic correction of reference mass disabled
Automatic correction of reference mass enabled
does not result in printing and saving weighings.
It concerns the <
.
changes its functionality.
Counting pieces> working mode
Working modes> according to ch.
71