Work Mode - Weighing; Starting The Working Mode; Wo King Modes - Counting Pieces; R 24.1. Starting The Working Mode - RADWAG WPY series User Manual

23. WORK MODE - WEIGHING

The < Weighing> mode is the standard working mode allowing
to perform weighings and saving them in the database
< Weighings / Alibi>.

23.1. Starting the working mode

The < Weighing> mode is the standard working mode. If a user has
changed the operating mode to another follow the actions below:
• While in the main window press the icon with mode name placed on
the top bar on the left then submenu comprising all accessible working
modes <Working Modes> opens,
• Choose <
window displaying icon
24. WORKING MODES – COUNTING PIECES
Counting pieces is work mode allowing to count pieces on the basis
of the standard unit mass of a single piece set on the scale or fetched
from the database.
Notice:
If counting pieces is performed in an additional container it should be tarred.
24.1. Starting the working mode
Procedure:
• While in the main window press
see a submenu <Working Modes> comprising a list of modes,
• Choose <
to the main window displaying icon
Weighing>, program automatically returns to the main
in the top bar.
Counting Pieces>, program automatically returns
in the top bar, then you will
in the top bar,
73