Statistics; Automatic Correction Of Reference Mass - RADWAG WPY series User Manual

• Confirm the changes introduced by pressing

22.6. Statistics

All statistics are continuously updated after each measurement is saved
in the scale memory. Statistics can be calculated globally (does not depend
on the selected product) or separately for every product from the assortment
database. It can be set in parameters <
Procedure:
• Enter <
in chapter 22 of the manual,
• Enter the required working mode and choose <
and then set the required option.
Options:
Global
Product
Notice:
In case of operation with <
that after restarting only statisics of the last weighed product are recovered.

22.7. Automatic correction of reference mass

Working mode <
Automatic correction of reference mass>, that can be used for
<
correcting the unit mass <SMP>.
To enable the function in parameters you need to:
• Enter parameter group <
22 of this manual, choose: „
correction of reference mass" and set appropriate option.
Working modes> parameter group as described
- global statistics,
- statistics for every product.
Statistics> set to <Product> bare in mind
It concerns the <
Counting Pieces> comprises a special function
Statistics>.
Counting pieces> working mode
Working modes> according to ch.
Counting Pieces /
70
.
Statistics>
Automatic