Labelling Mode; Setting Of The Number Of Labels To Print - RADWAG WPY series User Manual

Total sum
Autotare

22.5. Labelling mode

The labelling system is intended to print labels for marking weighed goods
e.g. a packing process. The program can print standard labels for single
products, cumulative labels for sticking to bulk containers and cumulative
labels for cumulative labels for sticking to the large transport containers
holding bulk containers.
In submenu <
functions:
Number of labels
No. of cumulative labels
No. of CC labels
C label automatic triggering
CC label automatic triggering

22.5.1. Setting of the number of labels to print

In the parameter <
of labels. They are printed on the printer connected to the weight.
Procedure:
• Enter parameters group <
to ch. 22 of this manual,
- Summing up all subsequently entered tare values
- Automatic tare mode together with mode
<Sum of all>
Labelling mode> there are accessible following special
Number of labels> user defines the amount
Working Modes> according
65