2. The change in on mode results in the same change for other working
modes working modes.
22.1. Recording mode
Depending on setting parameter <
from the scale to an external device.
Procedure:
• Enter parameters group <
to ch. 22 of this manual,
• Enter the required mode and choose <
the required mode.
Accessible options:
• Manual every stable,
• Manual first stable,
• Automatic first stable,
• Automatic last stable.
22.2. Down-weighing
Software allows to weigh in the "down-weighing" mode. It consist in putting
the load on the pan and taking off/removing portions of it with concurrent
saving weighings equal to the portions taken off the pan.
Procedure:
• Enter parameters group <
to ch. 22 of this manual,
• Enter the required working mode and choose <
and then set the required option.
Accessible options:
No
Yes
-
Traditional weighing
-
Down-weighing mode
Save Mode> users can send data
Working modes> according
Save Mode> then choose
Working Modes> according
63
Down-weighing>