Inputs / Outputs; Configuration Of Inputs - RADWAG WPY series User Manual

• The central green field – signals that the load on the pan is within the
set required interval for the weighed product (OK value between Min
and Max thresholds);
• The right red field – signals that the load on the pan is greater than
the maximum weighing threshold (Max threshold).

18. INPUTS / OUTPUTS

WPY/KO scales are equipped with 4 inputs / 4 outputs. To adjust software
to the users needs configure inputs outputs in the submenu
< Inputs / Outputs>:
•
indicator inputs,
•
indicator outputs.
In order to enter submenu <
:
and then
„

18.1. Configuration of inputs

Procedure:
• Enter <
• Choose <
a list of functions to ascribe,
• Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Notice:
The list of functions to ascribe to inputs are described in APPENDIX B
of this manual. By default inputs have no ascribed functions <None>.
Parameters /
Inputs / Outputs> according to ch. 18 of this manual,
Inputs> and enter the selected input you will see
Inputs / Outputs>, press
Inputs / Outputs".
52