Rs 232 Settings; Ethernet Setting - RADWAG WPY series User Manual

In order to enter <
„ Parameters /

15.1. RS 232 settings

Procedure:
• Enter <
COM1> or <
<
For RS 232 following parameters are accessible:
• Baud Rate
• Data bits
• Stop Bit
• Parity

15.2. ETHERNET setting

Procedure:
• Enter <
select <
Following settings are accessible for Ethernet:
• DHCP
• IP Address
• Subnet Mask
• Default gateway - 192.168.0.1
Notice:
The settings above are only for information purposes. Transmission
parameters should be matched to the local client network.
•
After making changes press
<Restart to apply the changes>,
Communication>, press
Communication".
Communication> according to ch.15 of the manual, select
COM2>, and then set an appropriate value.
- 4800, 9600, 19200, 38400, 57600, 115200 bit/s
- 5, 6, 7, 8
- No, 1, 1.5, 2
- No – Odd – Even – Mark – Space
Communication> according to ch.15 of the manual,
Ethernet> and then set an appropriate value.
- Yes – No
- 192.168.0.2
- 255.255.255.0
, then a new message is displayed:
35
:
and then