Computer Address; Continuous Transmission - RADWAG WPY series User Manual

The scale can communicate with a computer via following ports:
• RS 232 (COM1),
• RS 232 (COM2),
• Tcp.

16.1.2. Computer address

Procedure:
• Enter <
16 of the manual,
• Choose „
with the screen keyboard appears,
• Enter the required address and confirm it by pressing

16.1.3. Continuous transmission

Users can enable continuous transmission from the scale to a computer.
Setting parameter <
sending data from <
„Setup / Devices /
Procedure:
• Enter parameters' group <
manual,
• Choose „
set an appropriate value.
Accessible settings:
-
No
-
Yes
Devices> parameter group as described in chapter
Computer /
Continuous transmission> starts subsequent
Weighing Printout Pattern> set in submenu:
Computer /
Computer /
Continuous transmission off
Continuous transmission on
Address" then the window <Address>
Weighing Printout Pattern".
Devices> according to ch. 16 of this
Continuous transmission" and then
37
.