Automatic Triggering Of Cumulative Labels - RADWAG WPY series User Manual

• Enter the required number od cumularive labels and confirm
by pressing

22.5.4. Automatic triggering of cumulative labels

Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters <
< Threshold>.
Procedure:
• Enter <
in chapter 22 of the manual,
• Enter the required working mode and choose: „
C label automatic triggering /
required option:
None
Mass
Number
*) Manual printing of cumulative labels can be done in two ways
depending on the button used:
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
.
Working modes> parameter group as described
- Cumulative label printout is initiated by pressing
*
or
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the total from single weighings,
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the number of single weighings.
Mode> and
Mode" and then set the
,
67
Labelling mode /
Threshold>. The value
Threshold>. The value