RADWAG WPY series User Manual page 69

None
Mass
Number
*) Manual printing of cumulative labels can be done in two ways depending
on the button used:
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button
display but activating the button
„ Parameters /
(see ch. 17.2 of the manual).
For automatic printout cumulative labels of cumulative (CC)
labels counters and total mass variables are always zeroed.
• Confirm the changes by pressing
Threshold> then <Threshold> window appears with
<
the screen keyboard,
• Set the appropriate value for automatic triggering CC labels:
−
If parameter <
required value of total mass to exceed in order to print the
CC label,
−
If parameter <
keyboard to enter the required counter value as a threshold to
trigger off printing CC labels.
- Cumulative label of cumulative labels printout is initiated
by pressing
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
The value is treated as the total from single weighings,
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
The value is treated as the number of single weighings,
Display /
Mode> is set to <Mass> then enter the
Mode> is set to <Number> use the screen
*
or ,
is accessible in the bottom part of the
can be done in subm
Actions"
and go to parameter
69
Threshold>.
Threshold>.
enu: