Checkweighing; Tare Mode - RADWAG WPY series User Manual

22.3. Checkweighing

In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group <
of this manual,
• Enter the required working mode and choose <
then set the required option.
Options:
-
No
-
Yes

22.4. Tare mode

This function enables users to set parameters for tarring.
Procedure:
• Enter parameters group <
of this manual,
• Enter the required working mode and choose <
and then set the required option.
Options:
Single
Current sum
Every weighing is recorded
Only weighings between MIN, MAX are recorded.
- Basic tare mode. The set (chooden) tare value
is overwritten after entering a new value.
- Summing up tare values of product and package
together with manually inscribed tare. After next
setting of product or package tare the entered
tare value is disabled.
Working Modes> according to ch. 22
Working Modes> according to ch. 22
64
Checkweighing>
Tare mode>