Minimum Weight For Different Functions (Lo); Communication - RADWAG WPY series User Manual

If AUTOZERO is disabled zero is not corrected automatically. However,
in particular cases, this function can disrupt the measurement process e.g.
slow pouring of liquid or powder on the weighing pan. In this case, it is
advisable to disable the autozero function.
Procedure:
• Enter <
Autozero> and then set an appropriate value.
<
Accessible settings:

14.4. Minimum weight for different functions (LO)

Parameter <LO THRESHOLD> is associated with automatic weighing.
Next weighing will not be saved until the indication goes under the
THRESHOLD LO (net).
Procedure:
• After entering <
a keyboard is displayed,
• Inscribe LO and confirm by pressing

15. COMMUNICATION

The scale can communicate with external devices via different ports:
•
•
•
•
Tcp.
The communication can be configured in parameters' group
< Communication>.
Weighing> according to ch. 14 of the manual, select
- Autozero off
NO
- Autozero on
YES
Threshold Lo> according to ch. 14 of this manual
COM 1 (RS232),
COM 2 (RS232),
Ethernet,
.
34