Infors HT Multitron Standard Operating Manual page 26

Multitron Standard - Operating Manual
Setup and Function
Page 24 of 114
INFORMATION
The load weights must be within the permissible range. If the load
is too light or too heavy, this will prevent the table from running
smoothly, leading to increased wear on the bearings and joints.
The permissible load weights depend on the position of the device
in the stack, the throw and the shaking speed (see chapter 6.2.6
"Tips & Tricks for Loading the Tray", page 58).
Operation
The shaker drive is operated using the "Speed" parameter (
tations Per Minute). For an exact description of how to set the pa-
rameters, see chapter 6.4 "Adjusting, Activating and Deactivating Pa-
rameters", page 65.
RPM
, Ro-
17 March 2021