Electrical Current; Danger Due To Moving Parts; Unauthorised Spare Parts And Accessories - Infors HT Multitron Standard Operating Manual

Multitron Standard - Operating Manual
Safety and Responsibility
2.6.1

Electrical Current

2.6.2

Danger due to Moving Parts

2.6.3

Unauthorised Spare Parts and Accessories

Page 14 of 114
The device is operated electronically. There is an immediate risk of fa-
tal injury if contact is made with live parts.
The following points must be observed in order to avoid the risk of
fatal injury:
In case of damage to insulation, disconnect the device from the

mains immediately and arrange for it to be repaired.
Disconnect the device from the mains before commencing any

work on the electrical system.
Always use qualified electricians for any work on the electrical

system.
Disconnect the device from the mains before beginning any

maintenance, cleaning or repair work.
Do not bypass any fuses or take them out of operation.

When replacing fuses, ensure they have the correct number of

Amperes.
If the power cable is defective, replace it with a power cable of

the same type.
Keep moisture away from live parts. It may lead to a short cir-

cuit.
Never remove covers from the casing.

There is a risk of injury from moving parts. Body parts can be pinched
or scratched when one is not careful.
However, there is no danger that clothing or body parts can be
pulled into the device due orbital movement of the table.
The danger that fingers are pinched has been minimised by means of
a sufficient distance between the tray and the casing and a stop
mechanism that stops the shaker drive when the door is opened.
Nonetheless, the cultivation flasks must only be moved when the ta-
ble has come to a complete standstill.
Incorrect or imitated spare parts and accessories as well as spare parts
or accessories that have not been authorised by the manufacturer
represent a significant safety risk. As such, we recommend procuring
all spare parts and accessories from an authorised dealer or directly
from the manufacturer. For the contact details of the manufacturer's
representatives, see page 2.
17 March 2021