Device Identification (Standard Identification Plate); Declaration Of Conformity; Customer Service And Services - Infors HT Multitron Standard Operating Manual

1.3 Device Identification (Standard Identification Plate)

1.4 Declaration of Conformity

1.5 Customer Service and Services

17 March 2021
The identification plate is designed to allow clear identification of the
device. It contains the following information:
Manufacturer name

Designation =

Type =

S/N =

Year =

Mains =

Current =

Manufacturer address

CE marking

The device is in compliance with the essential requirements of the
following Directives:
Machinery Directive 2006/42/EC

EMC Directive 2014/30/EU

The Declaration of Conformity according to EC Machinery Directive
2006/42/EC, annex II 1 A is attached to the operating manual (see
chapter 12 "EC-Declaration of Conformity", page 109).
Our Customer Service is at your disposal for technical advice and spe-
cialist enquiries. For contact information, see page 2.
Due to their familiarity with the potential applications of the device,
the Customer Service team is able to provide information on whether
the device can be used for a specific application or modified to han-
dle the planned process.
Furthermore, our colleagues are always interested in new information
and experiences resulting from user's applications for the device that
may be valuable for the continued development of our products.
Multitron Standard - Operating Manual
General Information
Category of device
Device type (name)
Serial number
Year of manufacture
Nominal voltage and frequency
Current consumption
Page 7 of 114