Infors HT Multitron Standard Operating Manual page 75

17 March 2021
Setting the Setpoints for Phase 2 (FT Button)
1
5. Press the FT button (2) to select the parameter in question (RPM
or °C).
Next phase (FT)
The
6. Press the Plus or Minus button (3) to set the setpoint you want
to use for the selected parameter.
7. Press the On/Off button (4) to activate the parameter.
8. Repeat steps 5 – 7 as necessary for the other parameters.
Setting the Timer (F Button)
1
9. Select the timer function using the F button (3).
Timer
The parameter symbol (2) will light up
10. Use the Plus or Minus button (4) to set the required time.
11. Activate the timer using the On/Off button (5).
Timer active
The function symbol (1) will flash.
Multitron Standard - Operating Manual
2 3
function symbol (1) will light up.
4
2 3
Operation
4
5
.
Page 73 of 114