Aborting The Timer Function - Infors HT Multitron Standard Operating Manual

Multitron Standard - Operating Manual
Operation
6.5.5

Aborting the Timer Function

Procedure
Page 78 of 114
The timer function can be aborted at any time. To do so, proceed as
follows:
1
1. Select the timer function using the F button (3).
Timer
The parameter symbol (2) will light up
time will be displayed in the right-hand view box.
2. Deactivate the timer using the On/Off button (4).
Timer active
The function symbol (1) will go out.
The device will now run with the set setpoints until it is switched
off manually or the setpoints are modified.
INFORMATION
If both timers are active, you will only need to deactivate the first
timer (F button); the second timer (FT button) will then be deac-
tivated automatically.
2 3 4
.
The remaining
17 March 2021