Table of Contents
Advertisement
ENGLISH
3. INSTRUCTIONS FOR USE
3.1) Control grip
The control grip has been designed to provide easy and comfortable access to the operating
buttons both in vertical and horizontal positions (Ref. to fig. 8, 9).
Refer to Fig. 2 and operate as follows:
Horizontal use - Hold the control grip so as to use SAFETY INTERLOCK (15H) and AC-
CELERATOR BUTTON (02H).
Vertical use - Hold the control grip so as to use SAFETY INTERLOCK (15V) and AC-
CELERATOR BUTTON (02V).
To facilitate starting the wrench, the accelerator must be locked in the semi-acceleration
position.
To do this follow the operations below in the order given:
1. Move the selector (13) to po-
sition 5.
02H
2. Hold the control grip (01) so
the safety interlock (15) is
pressed.
3. Press fully and hold the acce-
lerator button (02).
4. Press the accelerator lock but
ton (11) and release the ac-
celerator, which will remain
locked in the semi-acceleration
position.
After starting engine (see § 5),
operate the accelerator (02)
which, on release, will bring the
the engine to the minimum revs.
To avoid accidental acceleration, the safety interlock must always be pressed
before the accelerator button is operated.
3.2) Assembly / disassembly of sockets
The wrench is preset to receive sockets available on the market having the following
features:
– Specified for impact tooling.
– Assemble on to 25.4 mm (1") square shaft with through bore.
Before use, always check to make sure the socket shows no signs of breakage or
particular wear. If the socket does not fit tightly on the square shaft this could result
in a loss of power and excessive wear of components.
01
15H
02V
15V
13
(available separately)
5
11
06
70
Air filter - Filtre à air - Luftfilter - Filtro del aire - Filtro aria
14
C
B
G
Max. oil level
Niveau maxi. d'huile
Max. Ölstand
Nivel de aceite máx.
Livello max. olio
Spark plug
Bougie
Zündkerze
Bujía
Candela
T
Advertisement
Table of Contents
