Table of Contents
Advertisement
• Remote door control system (option)
- The machine operator can lock, unlock and open the cab door by means of the remote key tag, as
long as he is within a range of 15 meters from the machine.
- Please note that the door cannot be closed using the Remote Key Tag.
• Door control deactivation time setting
-
There is a limited period of a maximum of 10 days that can be set during which the 'Remote
Door Functionality' can be used if the machine has been parked or at a standstill.
-
If the machine is parked or at a standstill for a period that exceeds the period in days set by the
operator without any activity, then to prevent the machine batteries from draining, the 'Remote
Door Functionality' will be disabled.
-
When this happens, the operator will be able to only use the machine Key to open the cab door,
after which the 'Remote Door functionality' can be enabled again during first start-up.
-
During the first start-up after the machine was inactive for a period that exceeds the period in
days set by the operator, the operator will be able to see the below pop-up on the monitor, by
which the operator can then enable the 'Remote Door functionality' again by clicking the 'Set-
ting' tab and confirming the settings thereafter.
• Tag management
•
Tag number
•
Max 5 tags can be regis-
tered.
•
Battery alarm
•
Check tag's battery status.
(normal or low)
•
Communication history (check,
lock, unlock, open)
a.
Door lock
b.
Door unlock
c.
Door open (press and hold for 2 seconds)
Do not activate this function if there is person
nearby the door and when machine work or
travel.
3-35
Hide quick links:
Advertisement
Table of Contents
