Hyundai HL930A Operation & Maintenance Manual page 31

Name
Welding helmet
Protective clothing
Protective gloves
Protective goggles
Earplugs and earmuffs
Safety shoes
(3) Health and safety instructions in hazardous environments
Comply with the following instructions during operation and maintenance of the machine.
(4) When handling oil
Failure to wear personal protection may result in
burns caused by contact with a high-temperature liq-
uid. Make sure you wear protective goggles, protec-
tive gloves and protective clothing when handling oils
such as hydraulic oils and engine oil.
If the eyes come into contact with oil, wash them with
a sufficient quantity of water for 15 minutes or longer.
If the skin comes into contact with oil, take off conta-
minated clothes and shoes, and wash the skin with
soap and water for 15 minutes or longer.
Symbol
Blocks airborne dust and slag, and shields the face from bright light
during welding.
Blocks dust, mist and hazardous chemicals, and protects against
burns.
Electric insulation gloves: Should be worn when working in areas with
a high risk of electric shock.
Chemical protective gloves: Should be worn when working in areas
where there is a risk of contact with hazardous chemicals including
materials leaked from batteries.
Protects the eyes from dust, particles and airborne materials in work
areas.
Wear earplug and earmuffs separately or in combination depending
on the level and duration of noise.
Protects the feet from falling objects, impacts, and sharp objects.
1-7
Remarks