Table of Contents
Advertisement
33) REPLACEMENT OF TRANSMISSION OIL
AND FILTER ELEMENT
(1) Operate the machine for a few minutes in order
to warm the transmission oil.
(2) Move the machine to level ground. Lower the
bucket to the ground and slightly apply down-
ward force.
(3) Press the parking brake switch and stop the en-
gine.
(4) Open transmission air breather to relieve inter-
nal air pressure.
(5) Remove the transmission drain plug. Allow the
transmission oil to drain into a suitable contain-
er.
(6) Remove the transmission oil filter cartridge.
Dispose of the used transmission oil filter car-
tridge properly.
(7) Clean the filter cartridge mounting base. Re-
move any part of the filter cartridge gasket that
remains on the filter cartridge mounting base.
(8) Apply a light coat of oil to the gasket of a new
transmission oil filter cartridge.
(9) Install the new transmission oil filter cartridge.
Screw the filter in until contact with the sealing
surface is obtained and tighten it now by hand
about 1/3 to 1/2 turn.
6-45
Air breather
Drain plug
73036MI14
Hide quick links:
Advertisement
Table of Contents
