Adjustment Of The Work Equipment - Hyundai HL930A Operation & Maintenance Manual

8. ADJUSTMENT OF THE WORK EQUIPMENT

The bucket can be adjusted to a desired height by using the boom kick-out device.
Park the machine on level ground and block the tires to prevent sudden movement of the
machine.
Press the parking brake switch.
Fix the front and rear frames by using the safety lock bar.
Do not work underneath the working equipment.
1) ADJUSTMENT OF THE BOOM KICK OUT
AND BUCKET LEVELER
(1) Lift kickout position
To set the lift kickout, raise the bucket to
the desired position above the midway
point. Then push icon (
seconds. The boom will return to the pro-
grammed position when the raise detent is
activated and the boom is below the kick-
out position.
(2) Lower kickout position
To set the lower kickout, lower the bucket
to the desired position below the midway
point. Then push icon (
seconds. The boom will return to the pro-
grammed position when the float detent is
activated and the boom is at least a foot
above the kickout position.
(3) Bucket leveler position
To set the bucket leveler, roll back the
bucket to the desired position. Then push
icon ( , B) for 2~3 seconds. The buck-
et will return to the programmed position
when the roll back detent is activated and
the bucket is below the leveler position.
, A) for 2~3
Bucket pivot pin
, A) for 2~3
4-20
Detent setting switch
Boom pivot pin
Midway
point
Detent position
Neutral
A
B