Table of Contents
Advertisement
d.
Press connect menu among the handsfree option on your cellular phone.
e.
The cellular phone should prompt for a pin code. Insert the pin code 1234.
f.
The cellular phone should confirm that it has established a new paired connection.
g.
Close the menu. The pairing is now completed. It appears PAIR FAIL on the display for 3 seconds.
Each cellular phone type has distinct phone menu so you may need to refer to your manu-
factures instruction for the correct procedure on how to connect a new bluetooth device.
Please retry to the pairing instruction if HYUNDAI does not appear on the cellular phone
screen.
Please select authorized, if there is authorized menu in the menu of bluetooth connection
in your cellular phone.
Once the bluetooth pairing is completed between your cellular pone and this audio unit,
the both units will be automatically recognized on its paring and when you turn on the key
in your car even though this audio unit is turned off.
This audio unit can store up to 6 phones pairings. If the memory is full, the first stored
paired phone will be deleted.
The connecting priority will be given to the last connected cellular phone.
If you want to change the connecting priority, try to connect this audio unit from the cellu-
lar phone.
Bluetooth connection and disconnection
a.
When established bluetooth connection between this audio unit and the cellular phone, bluetooth
icon on the display appears and then the display shows HF/AV CONN when handsfree & AV profile
connected.
Connecting priority of handsfree profile is higher than headset profile.
The headset mode does not support caller ID, reject call and call Transfer.
b.
To disconnect bluetooth link
Press and hold CALL END button (4) for 2 seconds, it shows DIS
CON and disappears bluetooth Icon on the display.
c.
To disconnect bluetooth link
Press CALL button (3) briefly, it blinks bluetooth Icon on the display
while bluetooth is being connected. If the connection is completed,
it appears bluetooth Icon on the display.
When your cellular phone battery is at low charge, the blue-
tooth connection may occasionally be lost. To maintain good
connectivity ensure that your phone battery is adequately
charged.
In case of failure of bluetooth pairing :
- Delete item in paired list on your phone.
- Reset both phone by power off/on and the audio unit by ACC
off/on.
3-85
Hide quick links:
Advertisement
Table of Contents
