Table of Contents
Advertisement
This audio unit phone call reception is on standby when ignition switch is set to ACC OFF
or ON.
The line-of-sight distance between this audio unit and your cellular phone must be 10 me-
tres or less for sending and receiving voice and data via Bluetooth wireless technology
However, the transmission distance may become shorter than the estimated distance de-
pending on the environment in use.
Digital Noise & Echo suppression system provides the best sound clarity with little or no
distortion (Echo & side tone will happen depending on cellular phone or service network).
To ensure the quality of calling, you should select a proper bluetooth VR level. This audio
unit has already set with the best bluetooth VR level.
Pairing in hands-free modes
e.
Bluetooth Icon and PAIR OK appear on the display when pairing is successful.
Cellular phone pairing mode
a.
Browse your cellular phone menu and find the connectivity or bluetooth connection section.
b.
Select search for a new handsfree device function and allow the phone to find the mobile.
c.
HYUNDAI should appear on your cellular phone screen.
a. Bluetooth icon
It will blink while establishing the bluetooth pairing.
It will light after a bluetooth device connected.
b. Battery icon
It indicates the battery status of the connected bluetooth device.
c. Signal strength icon
This indicates the signal strength of the connected Bluetooth device.
a.
Press and hold CALL button (4) for 2 seconds until you hear beep
sound. then appears PAIR STR on the display.
b.
For the next procedure, go to cellular phone pairing mode.
c.
If it is in pairing status with audio unit and cellular phone, PAIRING
will show on the display.
d.
If you want to exit pairing mode, press CALL END button (5) briefly
while pairing, then it will show PAIR CLR on the display.
3-84
Hide quick links:
Advertisement
Table of Contents
