Starting And Stopping The Engine - Hyundai HL930A Operation & Maintenance Manual

3. STARTING AND STOPPING THE ENGINE

1) CHECK INDICATOR LIGHTS
(1) Check if the parking brake switch is ON.
(2) Check if the gear selector lever is in neu-
tral position.
(3) Check if the pilot cut off switch is OFF.
(4) Turn the key to the ON position, and check
following:
• Cluster
If all the lamps light ON after
sounding buzzer for 3 seconds.
Only below lamps will light ON
and all the other light will be turn
OFF after 3 seconds.
-
-
-
• Monitor
The buzzer sounds for 3 sec-
onds with the Hyundai logo on
the monitor.
If the ESL mode is set to the en-
abled, enter the password to
start engine.
If the password has failed 5
times, please wait 30 minutes
before re-attempting to enter
the password.
Refer to the page 3-34 for ESL system setting.
2) STARTING THE ENGINE IN NORMAL TEM-
PERATURE
Sound the horn to warn the surround-
ings after checking if personnel or ob-
stacles are in the area.
(1) Check if the parking brake is locked (with
the parking switch ON).
(2) Check if the gear selector lever is in the
neutral position.
If the lamps do not light
or the buzzer is not soun-
ded, check disconnection
of wire.
Charging warning lamp (1)
Engine oil pressure warn-
ing lamp (2)
Brake fail warning lamp (3)
Gear selector lever
Pilot cut off switch
Parking brake switch
Cluster
Monitor
START
ON
4-3
OFF
OFF
77074OP04